ZyXEL NBG4615 User Guide - Page 201
Rule Configuration: User Defined Service Rule Configuration
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Chapter 26 Bandwidth Management Figure 127 Bandwidth Management Rule Configuration: Application List The following table describes the labels in this screen. Table 81 Bandwidth Management Rule Configuration: Application List LABEL # Enable Direction Bandwidth Destination Port Source Port Protocol Apply Cancel DESCRIPTION This is the number of an individual bandwidth management rule. Select an interface's check box to enable bandwidth management on that interface. These read-only labels represent the physical interfaces. Bandwidth management applies to all traffic flowing out of the router through the interface, regardless of the traffic's source. Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the NBG4615 and be managed by bandwidth management. Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or minimum bandwidth allowed for the rule in kilobits per second. This is the port number of the destination that define the traffic type, for example TCP port 80 defines web traffic. See Appendix E on page 295 for some common services and port numbers. This is the port number of the sourcethat define the traffic type, for example TCP port 80 defines web traffic. See Appendix E on page 295 for some common services and port numbers. This is the protocol (TCP,UDP or user-defined) used for the service. Click Apply to save your customized settings. Click Cancel to exit this screen without saving. 26.5.2 Rule Configuration: User Defined Service Rule Configuration If you want to edit a bandwidth management rule for other applications or services, click the Edit icon in the User-defined Service table of the Advanced screen. The following screen displays. NBG4615 User's Guide 201