ZyXEL NBG4615 User Guide - Page 214
Maintenance, Password
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Chapter 29 Maintenance The following table describes the labels in this screen. Table 86 Maintenance > General LABEL DESCRIPTION System Setup System Name System Name is a unique name to identify the NBG4615 in an Ethernet network. Domain Name Enter the domain name you want to give to the NBG4615. Administrator Inactivity Timer Type how many minutes a management session can be left idle before the session times out. The default is 5 minutes. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Apply Click Apply to save your changes back to the NBG4615. Cancel Click Cancel to begin configuring this screen afresh. 29.4 Password Screen It is strongly recommended that you change your NBG4615's password. If you forget your NBG4615's password (or IP address), you will need to reset the device. See Section 29.8 on page 219 for details. Click Maintenance > Password. The screen appears as shown. Figure 142 Maintenance > Password The following table describes the labels in this screen. Table 87 Maintenance > Password LABEL DESCRIPTION Password Setup Change your NBG4615's password (recommended) using the fields as shown. Old Password Type the default password or the existing password you use to access the system in this field. New Password Type your new system password (up to 30 characters). Note that as you type a password, the screen displays an asterisk (*) for each character you type. Retype to Confirm Type the new password again in this field. Apply Click Apply to save your changes back to the NBG4615. Cancel Click Cancel to begin configuring this screen afresh. 214 NBG4615 User's Guide