ZyXEL NBG4615 User Guide - Page 94
Wireless LAN General Screen
View all ZyXEL NBG4615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 12 WISP Mode 12.5 Wireless LAN General Screen Use this screen to configure the wireless LAN settings of your NBG4615. Go to Configuration > Wireless LAN > General to open the following screen. Figure 66 WISP Mode: Wireless LAN > General The following table describes the labels in this screen. Table 39 WISP Mode: Wireless LAN > General LABEL DESCRIPTION WISP Parameters SSID Enter the name of the access point to which you are connecting. Channel Selection The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a channel. The device will automatically select the channel with the least interference. Security Mode Select the security mode of the access point to which you want to connect. Apply Click Apply to save your changes back to the NBG4615. Cancel Click Cancel to reload the previous configuration for this screen. 12.5.0.1 No Security Use this screen if the access point to which you want to connect does not use encryption. Figure 67 No Security (WISP) The following table describes the labels in this screen. Table 40 No Security (WISP) LABEL DESCRIPTION WISP Parameters SSID Enter the name of the access point to which you are connecting. Channel Selection The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a channel. The device will automatically select the channel with the least interference. Security Mode Select No Security in this field. 94 NBG4615 User's Guide