Bernina Bernette 12 Instruction Manual - Page 110

Twin needle

Get Bernina Bernette 12 PDF manuals and user guides View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

10 12 15 EN Twin needle - Turn stitch length dial to the desired stitch length. - Pattern selector on " " or " ". - Center needle position. - Make sure that the two threads used to thread the twin needle are of the same weight. You can use one or two colors. - Insert the twin needle in the same way as single needle. Flat side of needle should face away from you. - Follow instructions for single needle threading. Thread each needle separately. Please note: When sewing with twin needle, always proceed slowly, and make sure to maintain low speed to insure quality stitching. When using twin needle on zigzag makesure the stitch width dial is set between "0" and "2.5". Do not use twin needle atsetting above "2.5". (model 15 ) Use only twin needle assemblies with max. 2 mm needle distance. (i.e.bernette part number 502020.62.91) Please note: No "S" marking is shown on the stitch length dial by model 10. a. Model 10/12 b. Model 15 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 106

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
EN
±0¶
10
12
15
- Turn stitch length dial to the desired stitch
length.
- Pattern selector on "
" or "
".
- Center needle position.
- Make sure that the two threads used to
thread the twin needle are of the same
weight. You can use one or two colors.
- Insert the twin needle in the same way as
single needle. Flat side of needle should
face away from you.
- Follow instructions for single needle
threading. Thread each needle separately.
Please note:
When sewing with twin needle, always
proceed slowly, and make sure to maintain
low speed to insure quality stitching. When
using twin needle on zigzag makesure the
stitch width dial is set between "0" and "2.5".
Do not use twin needle atsetting above
"2.5". (model 15 )
Use only twin needle assemblies with max.
2 mm needle distance.
(i.e.bernette part number 502020.62.91)
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
a. Model 10/12
b. Model 15
Twin needle
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR