Bernina Bernette 12 Instruction Manual - Page 38

Threading the upper thread

Get Bernina Bernette 12 PDF manuals and user guides View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

10 12 15 EN Threading the upper thread Caution: - Turn power switch to "O" before threading or unthreading the machine. - To release the upper thread tension the presser foot lever has to be raised. - The thread take-up lever must be in the highest position when threading. 1. Place spool on pin using appropriate spool disc (spool turns clockwise). Take thread through rear guide (A) and then into slit of upper thread tension. 2. Pull thread down to the right of the cover around point (B). 3. Take thread up to the left of the cover, placing it in the take-up lever (C). 4. Take thread down and through guide (D). Insert the thread through the eye of the needle from front to back. 5. Leave about 10 cm (4") of thread loose behind the needle, or cut the excess thread by using the thread cutter (E). 34 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
EN
³´
10
12
15
Caution:
- Turn power switch to "O" before threading
or unthreading the machine.
- To release the upper thread tension the
presser foot lever has to be raised.
- The thread take-up lever must be in the
highest position when threading.
1. Place spool on pin using appropriate
spool disc (spool turns clockwise). Take
thread through rear guide (A) and then
into slit of upper thread tension.
2. Pull thread down to the right of the cover
around point (B).
3. Take thread up to the left of the cover,
placing it in the take-up lever (C).
4. Take thread down and through guide (D).
Insert the thread through the eye of the
needle from front to back.
5. Leave about 10 cm (4") of thread loose
behind the needle, or cut the excess
thread by using the thread cutter (E).
Threading the upper thread
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR