Bernina Bernette 12 Instruction Manual - Page 72
Blind hem/lingerie stitch - test
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
10 12 15 EN Blind hem/lingerie stitch Presser foot available as optional accessory. For hems, curtains, trousers, skirts, etc. Blind hem/lingerie for firm fabrics. Blind hem for stretch fabrics. Set the machine as illustrated. Note: It takes practice to sew blind hems. Always make a sewing test first. Fold the fabric as illustrated with the wrong side uppermost. (1) Place the fabric under the foot. Turn the handwheel forward by hand until the needle swings fully to the left. It should just pierce the fold of the fabric. If it does not, adjust the stitch width accordingly. (2) Adjust the guide (3) by turning the knob (4) so that the guide just rests against the fold. Sew slowly, by pressing the foot control lightly, guiding the fabric along the edge of the guide. Please note: No "S" marking is shown on the stitch length dial by model 10. 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 68