Bernina Bernette 12 Instruction Manual - Page 32
Winding the bobbin - thread
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
10 12 15 EN Winding the bobbin 1. Place an empty bobbin on the spindle. 2. Guide the thread to the left, and pass it through the bobbin winder tension. Take the thread to the right till you reach the bobbin. 3. Wind the thread a few times by hand around the empty bobbin in a clockwise direction or pass the thread through one of the holes on the bobbin inside out and hold the thread. Push the bobbin to the right towards the bobbin winding position. Press the foot control gently. The bobbin will stop winding when it is full. Push the bobbin to the left to "sewing position" and remove it. Before threading the machine, cut the thread near the hole of the bobbin. Before threading the machine, cut the thread near the hole of the bobbin. Please note: When the bobbin winder spindle is in "bobbin winding" position, the machine and the handwheel can not be operated. To start sewing, push the bobbin winder spindle to the left (sewing position). 28 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR