Bernina Bernette 12 Instruction Manual - Page 78
the pattern selector knob on straight stitch
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
15 EN Sewing on buttons Move the drop feed control to right side to lower the feed dogs. (1) Change presser foot to button sewing foot. Turn the stitch length dial to "0". Position the work under the foot. Place the button in the desired position, lower the foot. Set the pattern selector knob on zigzag stitch. Adjust the stitch width between "3" -"5" according to the distance between the two holes of the button. Turn the handwheel to check that the needle goes cleanly into the left and right holes of the button. Set the pattern selector knob on straight stitch, and sew a few securing stitches. Set the pattern selector knob on zigzag stitch, and slowly sew on the button with about 10 stitches. Set the pattern selector knob on straight stitch, and sew a few securing stitches. If a shank is required, place a darning needle on top of the button and sew. (3) For buttons with 4 holes, sew through the front two holes first (2), push work forward and then sew through the back two holes(3). Move the drop feed control to left side for normal use. 74 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR