Bernina Bernette 12 Instruction Manual - Page 122
Walking foot
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
10 12 15 EN Walking foot Presser foot available as optional accessory. Always try to sew first without the walking foot accessory which should be used only when necessary. The "Walking foot" accessory equalizes the feeding of the upper and lower layers of fabric and improves the matching of plaids, stripes and patterns. This foot helps to prevent uneven feeding of very difficult fabrics. 1. Lift the presser foot bar. 2. Remove the "presser foot holder". (see page 26) 3. Attach the "walking foot" to the machine in the following way. i) The fork arm should fit into the needle screw and clamp. (2) ii) Slide the plastic "attaching head" from your left to right so that it is fitted on the "presser foot bar". iii) Lower the "presser foot bar". iv) Tighten the fixation screw 4. Make sure both the "needle screw" and the "fixation screw" are tight. 5. Draw the bobbin thread up. Lay both threads to the back under the foot. a Fork arm b Attaching head c Needle bar d Needle screw & clamp e Presser bar attaching screw f Presser foot bar 118 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR