Bernina Bernette 12 Instruction Manual - Page 116
Quilting
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
10 12 15 EN Quilting 1/4" Quilting foot available as optional accessory. - Set stitch length control between "2" - "4". - Pattern selector on " " or " ". - Center needle position. Procedure: Seam allowance 1/4 inch (6 mm) Place the fabric under the presser foot so that the raw edges are aligned with the seam guide sew seam by guiding the fabric along the guide so that perfect 1/4 inch seams are stitched. Seam allowance 1/8 inch (3 mm) Position the fabric under the foot raw edges aligned with the outer edge of the right toe (see arrow). Stitch perfect 1/8 inch seams. The notches on the left edge of the foot are 1/4 inch in front and behind the needle located. The centre notch is in line with the point of needle penetration. The markings are helpful when the patchwork seam should start or end 1/4 inch in from the fabric edge. Caution: This foot can only be used with straight stitch in centre position. Please note: No "S" marking is shown on the stitch length dial by model 10. 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 112