Bernina Bernette 12 Instruction Manual - Page 98
secure the threads. 4 First row: Always
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
15 EN Free motion darning Presser foot available as optional accessory. Set the machine as illustrated. Move the drop feed control to right side to lower the feed dogs. (1) Remove the presser foot holder. (2) (see page 26) Pattern selector on " ". Turn the stitch length dial to "0". Turn the stitch width dial to "0". Attach the darning foot to the presser foot bar. The lever (A) should be behind the needle clamp screw (B). Press the darning foot firmly from behind with your index finger and tighten the screw (C). (3) First sew round the edge of the hole (to secure the threads). (4) First row: Always work from left to right. Turn work by 1/4 and oversew. A darning ring is recommended for easier sewing and better results. Move the drop feed control to left side for normal use. Please note: No "S" marking is shown on the stitch length dial by model 10. 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 94