Bernina Bernette 12 Instruction Manual - Page 30
Attaching the presser foot, holder
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
10 12 15 EN Attaching the presser foot holder Attention: Turn power switch to "O" before carrying out any of the operations below. Raise the needle to its highest position and raise the presser foot lever. Attach the presser foot holder (b) to the presser foot bar (a). (1) Tighten the fixation screw. (A) Attaching the presser foot: Lower the presser foot holder (b) until the cut-out (c) is directly above the pin (d). (2) Lower the presser foot holder (b) and the presser foot (f) will engage automatically. Removing the presser foot: Raise the presser foot. Release the pressure foot by raising lever (e) located at the back of the foot holder. (3) Attaching the seam guide: Attach the seam guide (g) in the slot as illustrated. Adjust the distance as required for hems, pleats, etc....(4) 26 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR