Bernina Bernette 12 Instruction Manual - Page 86
Hemmer foot
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
10 12 15 EN Hemmer foot Presser foot available as optional accessory. For hems in fine or sheer fabrics. Set the machine as illustrated. Pattern selector on " " or " ". Set stitch length control between "2.5" - "4". Turn the stitch width dial to "0". (model 15) Neaten the edge of the fabric. At the beginning of the hem, turn under the edge twice by about 3 mm (1/8") and sew 4-5 stitches to secure. Pull the thread slightly towards the back. Insert the needle into the fabric, raise the presser foot and guide the fold into the scroll on the foot. (1) Gently pull the fabric edge towards you and lower the presser foot. Begin sewing, guiding the fabric into the scroll by holding it upright and slightly to the left. (2) Please note: No "S" marking is shown on the stitch length dial by model 10. 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR 82