Bernina Bernette 12 Instruction Manual - Page 34
Inserting bobbin
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
10 12 15 EN Inserting bobbin When inserting or removing the bobbin, the needle must be fully raised. - Open the hinged cover (1). - Remove the bobbin case by pulling its latch towards you and pulling it out from the hook. - Hold the bobbin case with one hand. Insert the bobbin so that the thread runs in a clockwise direction (arrow) (2). - Pull the thread through the slit and under the finger spring (3). - Hold the bobbin case by the hinged latch (4). - Insert it into the hook (5). Make sure the bobbin case finger fits into the notch (6) at the top of the race. Attention: Turn power switch to off ("O") before inserting or removing the bobbin. 30 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
EN
³0
10
12
15
When inserting or removing the bobbin,
the needle must be fully raised.
-
Open the hinged cover (1).
- Remove the bobbin case by pulling its
latch towards you and pulling it out from
the hook.
- Hold the bobbin case with one hand. Insert
the bobbin so that the thread runs in a
clockwise direction (arrow) (2).
- Pull the thread through the slit and under
the finger spring (3).
- Hold the bobbin case by the hinged latch
(4).
- Insert it into the hook (5). Make sure the
bobbin case finger fits into the notch (6) at
the top of the race.
Attention:
Turn power switch to off ("O") before
inserting or removing the bobbin.
Inserting bobbin
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR