Bernina Bernette 12 Instruction Manual - Page 124
Maintenance
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
10 12 15 EN Maintenance Caution: Main switch on "O". Disconnect machine from electricity supply before inserting or removing any parts and before cleaning. Cleaning Remove the stitch plate: Raise the needle to its highest position. Remove the extension table and open the hinged front cover on the front of the free arm. Loosen the two screws, then remove the stitch plate. (1) Cleaning and lubricating the hook: Take out the bobbin case by opening its latch and pulling it out from the shuttle race (3). Snap the two hook retaining arms (a) outwards. Remove the hook race cover (b) and the hook (c).Clean first the feed dogs with the brush (2). Then clean with a soft cloth hook (c), hook race (d) and hook race cover (b). Lubricate at the point (d) (1 to 2 drops) with sewing machine oil. Turn the handwheel until the driver (e) is in the left position. Replace the hook (c) then the hook race cover (b), snap back the two retaining arms (a). Insert bobbin and bobbin case and replace the stitch plate. Note: When the needle is lowered, the shuttle hook cannot be removed. Important: Fabric, fluff and threads must be removed regularly. Your machine should be serviced at regular intervals at your local dealer. 120 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR