Bernina Bernette 12 Instruction Manual - Page 52
Adjust pattern balance
View all Bernina Bernette 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
15 EN Adjust pattern balance If the decorative stitch patterns or buttonhole are uneven when sewing with particular fabrics, turn the feed balancing dial* with a screwdriver for adjustment. * This dial should usually be in a neutral position. (1) Adjusting distorted stretch stitch patterns If the patterns are too open, turn the dial counterclockwise. (2) "-" If the patterns are too close, turn the dial clockwise. (2) "+" Adjusting the stitch density of buttonhole If the stitches on the right side of the buttonhole are too open, turn the dial counterclockwise. (3) "-" If the stitches on the right side of the buttonhole are too close, turn the dial clockwise. (3) "+" 48 502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR
EN
´¸
15
If the decorative stitch patterns or
buttonhole are uneven when sewing with
particular fabrics, turn the feed balancing
dial* with a screwdriver for adjustment.
* This dial should usually be in a neutral
position. (1)
Adjusting distorted stretch stitch
patterns
If the patterns are too open, turn the dial
counterclockwise. (2) "-"
If the patterns are too close, turn the dial
clockwise. (2) "+"
Adjusting the stitch density of
buttonhole
If the stitches on the right side of the
buttonhole are too open, turn the dial
counterclockwise. (3) "-"
If the stitches on the right side of the
buttonhole are too close, turn the dial
clockwise. (3) "+"
Adjust pattern balance
502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR