Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 104

SEWING THE STITCHES ■ Patchwork (for Crazy Quilt) Turn back the desired width of fabric and position it over the lower fabric, then sew so that the stitch bridges both pieces of fabric. c Snap the cord guide bobbin cover into place, making sure that the gimp thread can be fed freely. * Make sure there are no restrictions when feeding the thread. ■ Sewing Curves (Using a Zigzag Stitch) Shorten the stitch length setting to obtain a fine stitch. Sew slowly, keeping the seams parallel with the fabric edge as you guide the fabric around the curve. d Set the zigzag (approx. 1/16 width from inch - 3/32 2.0 mm inch). - 2.5 mm e Attach presser foot "N". f Position the fabric right side up on top of the cord and place the cord to the rear of the machine under the presser foot. ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch) a Remove the bobbin cover from the ("Setting the Bobbin" of "Basic machine operations"). b Thread the gimp thread through the hole the cord guide bobbin cover from top to in bottom. Position the thread in the notch at the back of the cord guide bobbin cover. a Fabric (right side) b Gimp thread g Lower the presser foot and make a decorative finish. start sewing to a Notch b Gimp thread S-32