Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 108
Piecing
View all Brother International DreamWeaver„ VQ3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
SEWING THE STITCHES Stitch Stitch name Rick-rack stitch Decorative stitch Decorative stitch Hemstitching Hemstitching Single diamond overcast Overcasting stitch Piecing stitch (Right) Presser foot Note • The width range of stitch setting is only available in the Quilting stitch "Q" quilting category. ■ Piecing Sewing two pieces of fabric together is called piecing. When cutting pieces for quilt blocks, make sure the seam allowance is 6.5 mm (approx. 1/4 inch). a Select or and attach presser foot "J". b Align the edge of the the presser foot, and fabric with the start sewing. edge of * To sew a 6.5 mm (approx. 1/4 inch) seam allowance along the right edge of the presser foot with selected, the width should be set to 5.50 mm (approx. 7/32 inch). Piecing stitch (Middle) Piecing stitch (Left) Hand-look quilting Quilting appliqué zigzag stitch Quilting appliqué stitch a 6.5 mm (approx. 1/4 inch) * To sew a 6.5 mm (approx. 1/4 inch) seam allowance along the left edge of the presser foot with selected, the width should be set to 1.50 mm (approx. 1/32 inch). Quilting stippling Memo • When a stitch pattern in the Quilting Stitches category (Q-02 through Q-30) is selected, a finer stitch width can be set than is available with stitch patterns in other categories. For example: Stitch Q-03 has 57 needle positions and stitch Q-19 has 29 width selections. a 6.5 mm (approx. 1/4 inch) * To change the needle position, use or in the width display. S-36