Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 52

CHANGING THE PRESSER FOOT ■ Attaching the Free Motion Echo Quilting Foot "E" a Follow the steps in "Removing Foot" in the previous page. the Presser b Loosen the screw of the presser foot to remove the presser foot holder. holder e Attach "E" on the the free motion echo quilting foot left side of the adapter with the holes in the quilting foot and adapter aligned. a Disc-shaped screwdriver b Presser foot holder c Presser foot holder screw c Remove the screw of the presser completely from the presser foot foot shaft. f Tighten the screw screwdriver. with the included d Set the adapter on the presser foot aligning the flat side of the adapter bar, opening with the flat side of the presser bar. Push it up as far as possible, and then tighten the screw securely with the screwdriver. CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. B-50