Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 58

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE h Plug the connector of the dual feed foot into the jack on the back of your machine. ■ Using the Dual Feed Position Lever When the feed position lever is up, the black roller belt on the dual feed is not engaged. i Press buttons. to unlock all keys and → All keys and operation buttons are unlocked, and the previous screen is displayed. ■ When the Snap-On Foot of the Dual Feed Foot is Detached If you push down on the front part of the dual feed foot, the sole part of the dual feed foot will snap off. When the feed position lever is down, the black roller belt on the dual feed is engaged. Note • Do not operate the lever while sewing. Attach the sole by aligning the pins with the notches and snap it into place. a Pins b Notches ■ Adjusting the Amount of Fabric Feeding of the Dual Feed Foot The dual feed mechanism pulls the top fabric according to the set stitch length. With troublesome fabrics, fine tune the set length, by changing the dual feed feed adjustment in the settings screen. Note • As a default, some keys mentioned in the following procedures appear in light gray and are not available. To enable the keys for specifying the settings, attach the dual feed foot to the machine. The keys are enabled after the dual feed foot is detected. a Press . → The settings screen appears. b Display page 1 of the settings screen. B-56