Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 119

k Adjust the stitch width until the needle slightly catches the fold of the hem. SEWING THE STITCHES ■ If the Needle Catches Too Much of the Hem Fold The needle is too far to the left. S Press to decrease the stitch width so that the needle slightly catches the fold of the hem. 2 Utility Stitches a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. a Thick fabric b Normal fabric Memo • Blind hem stitches cannot be sewn if the left needle drop point does not catch the fold. If the needle catches too much of the fold, the fabric cannot be unfolded and the seam appearing on the right side of the fabric will be very large, leaving an unattractive finish. If you experience either of these cases, follow the instructions below to solve the problem. 1 2 a Wrong side of fabric b Right side of fabric ■ If the Needle does not Catch the Hem Fold The needle is too far to the right. Press to increase the stitch width so that the needle slightly catches the fold of the hem. Sewing S-47