Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 159

EDITING STITCH PATTERNS Memo • To finish a complete motif while sewing the pattern continuously, you can press the key while sewing. The machine will automatically stop when the motif is finished. Changing Thread Density (for Satin Stitch Patterns Only) Returning to the Beginning of the Pattern S When sewing character/decorative stitches, you can return to the beginning of the pattern after trial 3 sewing or when the stitching is sewn incorrectly. a Press the "Start/Stop" button to stop the machine, and then press . After selecting a satin stitch pattern, press to select your preferred thread density. Character/Decorative Stitches CAUTION • If the stitches bunch when thread density is changed to , return the thread density to . If you continue sewing when the stitches are bunched, the needle may bend or break. → Sewing returns to the beginning of the selected pattern ("W") from the point where sewing was stopped. Memo • If this key is pressed when sewing is stopped, patterns can be added at the end of a combined stitch pattern. (In this example, "!" is added.) Memo • Even if you select a new pattern after changing the thread density, the thread density remains the same until you change it. • You cannot change thread density for a combined pattern after additional patterns are added. b Press the sewing. "Start/Stop" button to continue Sewing S-87