Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 215

Specifications

Page 215 highlights

SPECIFICATIONS Marks Error Messages Cause/Solution This key does not operate when the needle is down. Raise the This message is displayed when a key on the LCD display is needle and press the key again. touched while the needle is in the down position. This pattern cannot be sewn with this mode. This message is displayed when the selected stitch is not available for the specific function. This stitch is not "Dual Feed Mode" compatible. This message appears when the dual feed foot cannot be used with the current stitch. Select other stitch. (see page B-54) This USB media cannot be used. This message is displayed when you try to use incompatible media. This USB media is incompatible. Transmitting by USB This message is displayed when you try to use incompatible USB media. For a list of compatible USB media, visit " http://solutions.brother.com ". This message is displayed while the USB media is transmitting. Turn off the power and replace the needle plate. USB media error This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This message is displayed when an error occurs with the USB media. USB media is not loaded. Load USB media. This message is displayed when you try to recall or save a pattern while no USB media is loaded. Use the presser foot lifter button to lower the presser foot. This message is displayed when a button, such as the "Start/Stop" button, is pushed while the presser foot is raised. When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate. This message is displayed when the speed control lever is set to control the zigzag stitch width, and the "Start/Stop" button is pushed. Use the foot controller to operate the machine. Maintenance and Troubleshooting A 2 SPECIFICATIONS Sewing Machine and Accessories (Box 1 of 2) Wide table box (Box 2 of 2) Total Shipping Weight Item Dimensions of machine Dimensions of box Weight of machine Weight of box (for shipping) Sewing speed Needles Dimensions of Wide table Dimensions of machine with Wide table Dimensions of box Weight of Wide table Weight of box (for shipping) Specification Approx. 57.1 cm (W) × 33.2 cm (H) × 28.4 cm (D) (approx. 22-1/2 inches (W) × 13-1/16 inches (H) × 11-3/16 inches (D)) Approx. 68.5 cm (W) × 55.0 cm (H) × 37.7 cm (D) (approx. 26-15/16 inches (W) × 21-5/8 inches (H) × 14-13/16 inches (D)) Approx. 15.4 kg (approx. 33.9 lb) Approx. 22.0 kg (approx. 48.5 lb) 70 to 1050 stitches per minute Home sewing machine needles (HA × 130) Approx. 63.6 cm (W) × 9.8 cm (H) × 40.6 cm (D) (approx. 25-1/16 inches (W) × 3-7/8 inches (H) × 16 inches (D)) Approx. 81.1 cm (W) × 33.2 cm (H) × 40.6 cm (D) (approx. 32-1/16 inches (W) × 13-1/16 inches (H) × 16 inches (D)) Approx. 66.3 cm (W) × 42.7 cm (H) × 5.8 cm (D) (approx. 25-1/16 inches (W) × 16-13/16 inches (H) × 2-5/16 inches (D)) Approx. 2.2 kg (approx. 4.9 lb) Approx. 3.0 kg (approx. 6.7 lb) Approx. 27 kg (approx. 59.6 lb) * Please be aware that some specifications may change without notice. Appendix A-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224

SPECIFICATIONS
Maintenance and Troubleshooting
Appendix
A-31
A
2
*
Please be aware that some specifications may change without notice.
This key does not operate when the needle is down. Raise the
needle and press the key again.
This message is displayed when a key on the LCD display is
touched while the needle is in the down position.
This pattern cannot be sewn with this mode.
This message is displayed when the selected stitch is not
available for the specific function.
This stitch is not “Dual Feed Mode” compatible.
This message appears when the dual feed foot cannot be used
with the current stitch. Select other stitch. (see page B-54)
This USB media cannot be used.
This message is displayed when you try to use incompatible
media.
This USB media is incompatible.
This message is displayed when you try to use incompatible
USB media. For a list of compatible USB media, visit
”.
Transmitting by USB
This message is displayed while the USB media is
transmitting.
Turn off the power and replace the needle plate.
This message is displayed when you try to sew with a stitch
other than a middle needle position stitch while the single-hole
needle plate is installed.
USB media error
This message is displayed when an error occurs with the USB
media.
USB media is not loaded. Load USB media.
This message is displayed when you try to recall or save a
pattern while no USB media is loaded.
Use the presser foot lifter button to lower the presser foot.
This message is displayed when a button, such as the
“Start/Stop” button, is pushed while the presser foot is raised.
When the speed controller is set to control the zigzag stitch
width, the “Start/Stop” button does not operate.
This message is displayed when the speed control lever is set
to control the zigzag stitch width, and the “Start/Stop” button
is pushed. Use the foot controller to operate the machine.
SPECIFICATIONS
Item
Specification
Sewing Machine and Accessories
(Box 1 of 2)
Dimensions of machine
Approx. 57.1 cm (W) × 33.2 cm (H) × 28.4 cm (D) (approx.
22-1/2 inches (W) × 13-1/16 inches (H) × 11-3/16 inches (D))
Dimensions of box
Approx. 68.5 cm (W) × 55.0 cm (H) × 37.7 cm (D) (approx.
26-15/16 inches (W) × 21-5/8 inches (H) × 14-13/16 inches
(D))
Weight of machine
Approx. 15.4 kg (approx. 33.9 lb)
Weight of box (for shipping)
Approx. 22.0 kg (approx. 48.5 lb)
Sewing speed
70 to 1050 stitches per minute
Needles
Home sewing machine needles (HA
×
130)
Wide table box
(Box 2 of 2)
Dimensions of Wide table
Approx. 63.6 cm (W) × 9.8 cm (H) × 40.6 cm (D) (approx.
25-1/16 inches (W) × 3-7/8 inches (H) × 16 inches (D))
Dimensions of machine with Wide
table
Approx. 81.1 cm (W) × 33.2 cm (H) × 40.6 cm (D) (approx.
32-1/16 inches (W) × 13-1/16 inches (H) × 16 inches (D))
Dimensions of box
Approx. 66.3 cm (W) × 42.7 cm (H) × 5.8 cm (D) (approx.
25-1/16 inches (W) × 16-13/16 inches (H) × 2-5/16 inches (D))
Weight of Wide table
Approx. 2.2 kg (approx. 4.9 lb)
Weight of box (for shipping)
Approx. 3.0 kg (approx. 6.7 lb)
Total Shipping Weight
Approx. 27 kg (approx. 59.6 lb)
Marks
Error Messages
Cause/Solution