Cisco 7965G Administration Guide - Page 139

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone Status Menu Network Statistics Screen The Network Statistics screen displays information about the phone and network performance. Table 7-3 describes the information that appears in this screen. To display the Network Statistics screen, follow these steps: Procedure Step 1 Step 2 Step 3 Press the Settings button. Select Status. Select Network Statistics. To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey. To exit the Network Statistics screen, press the Exit softkey. Table 7-3 Network Statistics Message Components Item Rx Frames Tx Frames Rx Broadcasts One of the following values: Initialized TCP-timeout CM-closed-TCP TCP-Bad-ACK CM-reset-TCP CM-aborted-TCP CM-NAKed KeepaliveTO Failback Phone-Keypad Phone-Re-IP Reset-Reset Reset-Restart Phone-Reg-Rej Load Rejected HC CM-ICMP-Unreach Phone-Abort Elapsed Time Port 1 Description Number of packets received by the phone Number of packets sent by the phone Number of broadcast packets received by the phone Cause of the last reset of the phone Amount of time that has elapsed since the phone last rebooted Link state and connection of the PC port (for example, Auto 100 Mb Full-Duplex means that the PC port is in a link up state and has auto-negotiated a full-duplex, 100-Mbps connection) OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 7-9