Cisco 7965G Administration Guide - Page 84
NTP Configuration Menu (SIP Phones Only), UI Configuration Menu
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone NTP Configuration Menu (SIP Phones Only) The NTP Configuration menu displays information about the NTP server and mode configuration used by SIP phones. Table 4-10 describes the options on this menu. Table 4-10 NTP Configuration Menu Options Option NTP Server 1 NTP Server 2 NTP Mode 1 NTP Mode 2 Description IP address of the primary NTP server. IP address of the secondary or backup NTP server. Primary server mode. Supported modes are Directed Broadcast, Unicast, Multicast, Any cast. Secondary server mode. Supported modes are Directed Broadcast, Unicast, Multicast, Any cast. To Change Use Cisco Unified Communications Manager Administration to modify. Use Cisco Unified Communications Manager Administration to modify. Use Cisco Unified Communications Manager Administration to modify. Display only-cannot configure. UI Configuration Menu The UI configuration menu displays the status of various user interface features on the phone. Table 4-11 describes the options on this menu. Table 4-11 UI Configuration Menu Options Option Auto Line Select BLF for Call Lists Reverting Focus Priority Description To Change Indicates whether the phone shifts the call focus to incoming calls on all lines. When this option is disabled, the phone only shifts the call focus to incoming calls on the line that is in use. When this option is enabled, the phone shifts the call focus to the line with the most recent incoming call. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Default: Disabled Indicates whether the Busy Lamp Field (BLF) is enabled for call lists. From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters. Indicates whether the phone shifts the call focus on the From Cisco Unified Communications phone screen to an incoming call or a reverting hold call. Manager Administration, choose System Settings include: > Device Pool. Lower-Focus priority given to incoming calls. See also: Hold Reversion. Higher-Focus priority given to reverting calls. Even-Focus priority given to the first call. 4-18 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 OL-14641-01