Cisco 7965G Administration Guide - Page 79
SIP Configuration Menu (SIP Phones Only), SIP General Configuration Menu
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-4 Cisco Unified Communications Manager Server Designations (continued) Designation (Authentication icon) (Encryption icon) Description Indicates that the connection to the Cisco Unified Communications Manager is authenticated. For more information about authentication, refer to Cisco Unified Communications Manager Security Guide. Indicates that the connection to the Cisco Unified Communications Manager is authenticated and encrypted. For more information about authentication and encryption, refer to Cisco Unified Communications Manager Security Guide. SIP Configuration Menu (SIP Phones Only) The SIP Configuration menu is available on SIP phones. This menu contains these sub-menus: • SIP General Configuration Menu, page 4-13 • Line Settings Menu, page 4-15 SIP General Configuration Menu The SIP General Configuration menu displays information about the configurable SIP parameters on a SIP phone. Table 4-5 describes the options in this menu. Table 4-5 SIP General Configuration Menu Options Option Description To Change Preferred CODEC Displays the CODEC to use when a call is initiated. This value Display only-cannot configure. will always be set to none. Out of Band DTMF Displays the configuration of the out-of-band signaling (for tone detection on the IP side of a gateway). The Cisco Unified IP phone (SIP) supports out-of-band signaling by using the AVT tone method. This value will always be set to avt. Display only-cannot configure. Register with Proxy Displays if the phone must register with a proxy server during Display only-cannot configure. initialization. This value will always be set to true. Register Expires Displays the amount of time, in seconds, after which a registration request expires. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Phone Label Displays the text that is displayed on the top right status line of the LCD on the phone. This text is for end-user display only and has no effect on caller identification or messaging. This value will always be set to null. Display only-cannot configure. OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 4-13