Cisco 7965G Administration Guide - Page 46
Adding Phones to the Cisco Unified Communications Manager Database - ip phones and load process
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Adding Phones to the Cisco Unified Communications Manager Database Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Table 2-4 Cisco Unified IP Phone Startup Process (continued) Configuration Step and Description Related Topics Step 7 Requesting the Configuration File. The TFTP server has configuration files, which define parameters for connecting to Cisco Unified Communications Manager and other information for the phone. See the "Understanding Phone Configuration Files" section on page 2-5. See the "Resolving Startup Problems" section on page 9-2. Step 8 Contacting Cisco Unified Communications Manager. The configuration file defines how the Cisco Unified IP Phone communicates with Cisco Unified Communications Manager and provides a phone with its load ID. After obtaining the file from the TFTP server, the phone attempts to make a connection to the highest priority Cisco Unified Communications Manager on the list. If security is implemented, the phone makes a TLS connection. Otherwise, it makes a non-secure TCP connection. See the "Resolving Startup Problems" section on page 9-2. If the phone was manually added to the database, Cisco Unified Communications Manager identifies the phone. If the phone was not manually added to the database and auto-registration is enabled in Cisco Unified Communications Manager, the phone attempts to auto-register itself in the Cisco Unified Communications Manager database. Note Auto-registration is disabled when security is enabled on Cisco Unified Communications Manager. In this case, the phone must be manually added to the Cisco Unified Communications Manager database. Adding Phones to the Cisco Unified Communications Manager Database Before installing the Cisco Unified IP phone, you must choose a method for adding phones to the Cisco Unified Communications Manager database. These sections describe the methods: • Adding Phones with Auto-Registration, page 2-9 • Adding Phones with Auto-Registration and TAPS, page 2-10 • Adding Phones with Cisco Unified Communications Manager Administration, page 2-11 • Adding Phones with BAT, page 2-11 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 2-8 OL-14641-01