Cisco 7965G Administration Guide - Page 91
Security Configuration Menu, Device, > Phone > Phone Configuration
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Security Configuration Menu The Security Configuration menu that you display from the Device Configuration menu displays settings that relate to security for the phone. Note The phone also has a Security Configuration menu that you access directly from the Settings menu. For information about the security options on that menu, see the "Security Configuration Menu" section on page 4-31. Table 4-15 describes the options on the Security Configuration menu. Table 4-15 Security Configuration Menu Options Option PC Port Disabled GARP Enabled Voice VLAN Enabled Web Access Enabled Security Mode Logging Display Description To Change Indicates whether the access port on the phone is enabled or disabled. Note If disabled, video will not work on this phone, even if video is enabled. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Indicates whether the phone learns MAC addresses from Gratuitous Address Resolution Protocol (ARP) responses. Disabling the phone's ability to accept Gratuitous ARP will prevent applications that use this mechanism to monitor and record voice streams from working. If voice monitoring is not desired, set this option to No (disabled). From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Indicates whether the phone allows a device attached to the access port to access the Voice VLAN. Setting this option to No (disabled) prevents the attached PC from sending and receiving data on the Voice VLAN. This setting also prevents the PC from receiving data sent and received by the phone. Set this setting to Yes (enabled) if an application that requires monitoring of the phone's traffic is running on the PC. These applications include monitoring and recording applications and network monitoring software. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Indicates whether web access is enabled (Yes) or disabled From Cisco Unified Communications (No) for the phone. Manager Administration, choose Device > Phone > Phone Configuration. Displays the security mode that is set for the phone. Use Cisco Unified Communications Manager Administration to modify. For use by the Cisco Technical Assistance Center (TAC), if necessary. OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 4-25