Cisco 7965G Administration Guide - Page 59
Configuration Step and Notes, Reference,
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 3 Setting Up the Cisco Unified IP Phone Installing the Cisco Unified IP Phone Table 3-1 Installing the Cisco Unified IP Phone 7965G and 7945G Configuration Step and Notes Step 4 Connect a straight-through Ethernet cable from the switch to the 10/100/1000 SW port. Each Cisco Unified IP Phone ships with one Ethernet cable in the box. You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for 100 Mbps connections and Category 5e/6 for 1000 Mbps connections. Step 5 Connect a straight-through Ethernet cable from another network device, such as a desktop computer, to the 10/100/1000 PC port. Optional. You can connect another network device later if you do not connect one now. You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for 100 Mbps connections and Category 5e/6 for 1000 Mbps connections. Reference See the "Network and Access Ports" section on page 3-4 for guidelines. See the "Network and Access Ports" section on page 3-4 for guidelines. Figure 3-1 Cisco Unified IP Phone 7965G and 7945G Rear Cable Connections 1 AUX 10/100/1000 SW 10/100/1000 PC DC48V 3 2 5 4 7 6 130055 OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 3-7