Cisco 7965G Administration Guide - Page 87

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-12 Media Configuration Menu Options (continued) Option Recording Tone Local Volume Recording Tone Remote Volume Recording Tone Duration Description To Change Indicates the loudness setting for the beep tone that is received by the party whose phone has the Recording Tone option enabled. This setting applies for each listening device (handset, speakerphone, headset). From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 percent (no tone) to 100 percent (same level as current volume setting on the phone). Default: 100 See also: Recording Tone Indicates the loudness setting for the beep tone that the remote party receives. The remote party is the party who is on a call with the party whose phone has the Recording Tone option enabled. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 percent to 100 percent. (0 percent is -66 dBM and 100 percent is -3 dBM.) Default: 84 percent (-10dBM) See also: Recording Tone Indicates the length of time in milliseconds that the beep tone plays. If the value you configure here is less than one third the interval, then this value overrides the default provided by the Network Locale. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 to 3000 Note For some Network Locales that use a complex cadence, this setting applies only to the first beep tone. See also: Recording Tone OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 4-21