Cisco 7965G Administration Guide - Page 75
Scroll to the DHCP Address, Scroll to the SW Port
UPC - 882658140464
View all Cisco 7965G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option DHCP Address Released Alternate TFTP SW Port Configuration Description To Change Releases the IP address assigned by DHCP. 1. Unlock network configuration options. 2. Scroll to the DHCP Address Released option and press the Yes softkey to release the IP address assigned by DHCP, or press the No softkey if you do not want to release this IP address. 3. Press the Save softkey. Indicates whether the phone is using an alternative TFTP server. 1. Unlock network configuration options. 2. Scroll to the Alternate TFTP option and press the Yes softkey if the phone should use an alternative TFTP server; otherwise, press the No softkey. 3. Press the Save softkey. Speed and duplex of the network port (labeled 10/100/1000 SW). 1. Unlock network configuration Valid values: options. • Auto Negotiate • 10 Half-10-BaseT/half duplex • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex • 1000 Full-1000-BaseT/full duplex 2. Scroll to the SW Port Configuration option and then press the Edit softkey. 3. Scroll to the setting that you want and then press the Select softkey. 4. Press the Save softkey. If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you should change the PC Port Configuration option to the same setting. This ensures that the PC receives the full benefits of the network operating speed. OL-14641-01 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1 4-9