Compaq DL580R01 Service Guide - Page 117

3-48 Compaq ProLiant DL580 Server Maintenance and Service Guide Table 3-18 Array Diagnostic Utility (ADU) Error Messages continued Message Description Recommended Action Swapped cables or Configuration error detected. A drive rearrangement was attempted while an expand operation was running. This is an unsupported operation. One or more drive locations were 1. Power down the server. changed while an expand operation was in progress. 2. Place the drives back in their original locations. 3. Restart the server, and complete the expand operation. 4. Move the drives to their new locations after the expand operation is completed. SOLUTION: Power down system then move drives back to their original location. Power on system and wait for the expand operation to complete before attempting a drive rearrangement. Swapped cables or Configuration error detected. An unsupported drive arrangement was attempted. SOLUTION: Power down system then move drives back to their original location. One or more physical drives were Move all drives back to their original locations, moved, causing a configuration that and refer to your user documentation for is not supported. supported configurations. Swapped cables or Configuration error detected. The cables appear to be interchanged. SOLUTION: Power down system then move the drives or cables back to their original location. ADU has detected a change in the cable configuration. One or more cables may be attached to the incorrect bus. -Or- One or more drives have been moved to new locations. Refer to your user documentation for supported configurations and cabling guidelines. Restore to the original configuration. continued