Compaq DL580R01 Service Guide - Page 25
Power On/Standby Switch with LED Indicators
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Removal and Replacement Procedures 2-9 Power On/Standby Switch with LED Indicators To remove the Power On/Standby switch with LED indicators: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 3. Disconnect the power switch cables from the power switch connector. 4. Disconnect the clips connected to each of the LED indicator terminals. IMPORTANT: Label each wire before disconnecting from LED indicator terminals. Figure 2-2. Disconnecting the Power On/Standby switch with LED indicators
Removal and Replacement Procedures
2-9
Power On/Standby Switch with LED Indicators
To remove the Power On/Standby switch with LED indicators:
1. Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2. Remove the top access panel. See
“
Top Access Panel
”
earlier in this chapter.
3. Disconnect the power switch cables from the power switch connector.
4. Disconnect the clips connected to each of the LED indicator terminals.
IMPORTANT:
Label each wire before disconnecting from LED indicator terminals.
Figure 2-2.
Disconnecting the Power On/Standby switch with LED indicators