Compaq DL580R01 Service Guide - Page 130
Compaq Integrated Remote Console, Features, Definition, IMPORTANT
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Diagnostics and Troubleshooting 3-61 Table 3-20 Automatic Server Recovery-2 (ASR-2) Features Features Software error recovery Software error recovery timeout Standby recovery server option Standby recovery server port Standby recovery time-out Software error recovery boot option Thermal shutdown UPS shutdown UPS shutdown threshold Definition When enabled, ASR-2 is activated if the operating system hangs or stops responding, resulting in a lockup. Determines how long the server waits before enabling ASR-2 after an operating system lockup. When enabled, ASR-2 activation initiates a switch to a designated standby recovery server. Port used to communicate with the recovery server. Determines how long the server waits to initiate a switch to a designated standby recovery server after ASR-2 activation. Allows the server to restart, either initiating the operating system or Compaq Utilities. When enabled, shuts down the server if a critical thermal error occurs. When enabled, allows the server to perform a shutdown if an uninterruptible power supply (UPS) is activated. Determines how long the server waits to shut down after the UPS is activated. If desired, this setting should provide enough time for an administrator to perform any necessary operations or to properly shut down the server. Compaq Integrated Remote Console The standard Compaq Integrated Remote Console performs a wide range of configuration activities. Console features include: Is accessible using ANSI terminal Operates independently of the operating system Provides for remote server restart Provides access to system configuration Uses out-of-band communication with dedicated management modem installed in the server For more information, refer to the Integrated Remote Console User Guide that shipped with the server. IMPORTANT: Before configuring ASR-2, verify that the System Configuration Utility and Diagnostics software are installed on the system partition. ASR-2 must have this software to start Compaq Utilities after a system restart. Compaq recommends verifying that the System Configuration Utility and the Diagnostics software is installed even if you configure ASR-2 to start the operating system.