Compaq DL580R01 Service Guide - Page 27
Front Bezel, Remove the Power On/Standby switch. See
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removal and Replacement Procedures 2-11 Front Bezel To remove the front bezel: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the Power On/Standby switch. See "Power On/Standby Switch with LED Indicators" earlier in this chapter. 3. Remove the 14 Torx T-15 screws . 4. Loosen the captive T-15 screw , then pull the front bezel away from the server. 3 2 1 Figure 2-4. Removing the front bezel Reverse steps 1 through 4 to replace the front bezel.
Removal and Replacement Procedures
2-11
Front Bezel
To remove the front bezel:
1. Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2. Remove the Power On/Standby switch. See
“
Power On/Standby Switch with LED
Indicators
”
earlier in this chapter.
3. Remove the 14 Torx T-15 screws
.
4. Loosen the captive T-15 screw
, then pull the front bezel
away from the server.
3
2
1
Figure 2-4.
Removing the front bezel
Reverse steps 1 through 4 to replace the front bezel.