Compaq DL580R01 Service Guide - Page 29
Hot-Plug Fan Assemblies
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Removal and Replacement Procedures 2-13 Hot-Plug Fan Assemblies WARNING: To reduce the risk of personal injury or damage to the equipment: Failed or failing fans should be left connected to the system until they can be replaced. If a fan must be removed while the server is powered up, there is a 5-minute period allowed to remove and replace the fan before the server shuts down. (Microsoft Windows NT, UNIX, and Novell NetWare) Removal of both fans causes overheating and subsequent server shutdown. NOTE: All hot-plug fan assemblies remove exactly the same way. To remove a hot-plug fan assembly: 1. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 2. Loosen the thumbscrew located at the top of the fan. 3. Lift the hot-plug fan straight out of the chassis. 1 2 Figure 2-6. Removing a hot-plug fan assembly Reverse steps 1 through 3 to replace a hot-plug fan.