Compaq DL580R01 Service Guide - Page 24
Top Access Panel
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2-8 Compaq ProLiant DL580 Server Maintenance and Service Guide Top Access Panel The ProLiant DL580 server ships standard in a rack-mount configuration. Remove the top access panel to service the internal components. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before removing them. To remove the top access panel: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Using a Torx T-15 screwdriver, loosen the three captive screws securing the top access panel to the bezel. 3. Slide the top access panel back, then lift it from the chassis. NOTE: The PCI Hot Plug access door allows access to the PCI Hot Plug area without removing the top access panel. Figure 2-1. Removing the top access panel Reverse steps 1 through 3 to replace the top access panel.