Compaq DL580R01 Service Guide - Page 163
Table 4-14, PCI Hot Plug LED Indicators, LED Condition, Power Status, OK to Open, Slot Status
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
4-18 Compaq ProLiant DL580 Server Maintenance and Service Guide LED Condition Green Amber Green Amber Green Amber Green Amber Green Amber Table 4-14 PCI Hot Plug LED Indicators Power Status On Off OK to Open No Slot Status Power is currently applied to the slot. Do NOT open the slot release lever. The slot is functioning normally. On No On Flashing No On Off No On Off Yes Off Power is currently applied to this slot but the slot needs ATTENTION for possible problem with the slot, board, or the driver. Do NOT open the slot release lever. Follow these steps: 1. Through the PCI Hot Plug application, turn power off to the slot (the green LED turns off). 2. Open the slot release lever (the amber LED turns off). 3. Remove or replace the board. 4. Connect the cables to the PCI board. 5. Close the slot release lever. 6. Return power to the slot through the PCI Hot Plug application (the green LED turns on). Power slot is being turned off or on, which may take several minutes. There may be a problem with the slot, the PCI board, or the driver. Do NOT open the slot release lever until the green LED is completely off. Power to this slot is turned off but this slot needs ATTENTION. There may be a problem with the slot, board, or the driver. 1. Open the slot release lever (the amber LED turns off.) 2. Remove or replace the board. 3. Connect the cables to the PCI board. 4. Close the slot release lever. 5. Return power to the slot through the PCI Hot Plug application (the green LED turns on.) The power to the slot is off. If you need to replace the board in this slot, follow these steps: 1. Open the slot release lever. 2. Remove or replace the board. 3. Connect the cables to the PCI board. 4. Close the slot release lever. 5. Return power to the slot through the PCI Hot Plug application (the green LED turns on.)