Compaq DL580R01 Service Guide - Page 58
PCI Hot Plug LED Switchboard and Cable, Remove all PCI Hot Plug expansion boards. See
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2-42 Compaq ProLiant DL580 Server Maintenance and Service Guide PCI Hot Plug LED Switchboard and Cable To remove the PCI Hot Plug LED switchboard and cable: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 3. Remove all PCI Hot Plug expansion boards. See "PCI Expansion Boards" earlier in this chapter. 4. Disconnect the PCI Hot Plug LED switchboard cable . 5. Remove the three T-15 screws that secure the PCI Hot Plug LED switchboard to the chassis. 6. Pull the PCI Hot Plug LED switchboard up, then lift the switchboard out from the chassis. 2 2 2 3 1 Figure 2-33. Removing the PCI Hot Plug LED switchboard and cable Reverse steps 1 through 6 to replace the PCI Hot Plug LED switchboard and cable.