Compaq DL580R01 Service Guide - Page 155
System Board ID/Miscellaneous Switches (SW6), CAUTION, Switches, Function, Settings
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
4-10 Compaq ProLiant DL580 Server Maintenance and Service Guide System Board ID/Miscellaneous Switches (SW6) Figure 4-8 shows the location of the system board ID/miscellaneous switches (SW6). Switch 1 is used to control booting from a spare processor. Switch 2 is used to disable the system board interlocks. Switches 3 and 4 are used for system chassis identification. Table 4-8 lists the functions and settings of the system board ID/miscellaneous switches. CAUTION: These settings are factory-set and do not need to be adjusted. They are only shown here for identification and diagnostics. Refer to the Compaq ProLiant DL580 Server Setup and Installation Guide for additional information. Off 1 2 3 4 Figure 4-8. System board ID/miscellaneous switches (SW6) Switches 1 2 3 4 Table 4-8 System Board ID/Miscellaneous Switches (SW6) Function Hot spare boot enable Interlock enable System chassis ID System chassis ID Settings Off = Enables hot spare boot On = Disable hot spare boot Off = Interlock enabled On = Interlock disabled Off = ProLiant DL580 server chassis On = ProLiant DL580 server chassis