Compaq DL580R01 Service Guide - Page 54
PCI Hot Plug button or using the PCI Hot Plug utility., Connectors, Switches, and LED Indicators
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2-38 Compaq ProLiant DL580 Server Maintenance and Service Guide 2. Before removing a PCI Hot Plug expansion board or a network interface controller (NIC), check the PCI Hot Plug LED indicator. If the expansion board is seated, the slot LED indicator should be green. See Chapter 4, "Connectors, Switches, and LED Indicators," for further information on PCI Hot Plug LED indicators. 3. If the PCI Hot Plug LED indicator is not green, power down the slot by pressing the PCI Hot Plug button or using the PCI Hot Plug utility. PCI Hot Plug Buttons 1 2 3 4 5 6 Figure 2-30. PCI Hot Plug buttons (top access cover removed for clarity) NOTE: Slots 1 and 6 are non-hot-pluggable. 4. Wait until both the green and amber LED indicators are off. CAUTION: If the green power LED indicator is on, do not open the slot release lever. The PCI Hot Plug button allows for PCI Hot Plug access directly at each PCI slot. A PCI Hot Plug button is located above each PCI slot, providing PCI Hot Plug control at the server, eliminating the use of the PCI Hot Plug utility software. Do not open the slot release lever unless the green PCI Hot Plug LED indicator on the slot is off. System power down and subsequent data loss can occur. NOTE: The PCI Hot Plug button can be pressed again within 5 seconds to cancel an action.