Compaq DL580R01 Service Guide - Page 50
SCSI Hard Drive Backplane Board
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2-34 Compaq ProLiant DL580 Server Maintenance and Service Guide SCSI Hard Drive Backplane Board To remove the SCSI hard drive backplane board: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the center wall. See "Center Wall" earlier in this chapter. 3. Disconnect the SCSI and power cables from the SCSI hard drive backplane board. 4. Remove the thumbscrew securing the SCSI hard drive backplane board to the hard drive cage. 5. Pull the SCSI hard drive backplane board up, then away from the drive cage area of the chassis. 1 2 3 4 Figure 2-26. Removing the SCSI hard drive backplane board Reverse steps 1 through 5 to replace the SCSI hard drive backplane board.
2-34
Compaq ProLiant DL580 Server Maintenance and Service Guide
SCSI Hard Drive Backplane Board
To remove the SCSI hard drive backplane board:
1. Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2. Remove the center wall. See
“
Center Wall
”
earlier in this chapter.
3. Disconnect the SCSI and power cables
from the SCSI hard drive backplane board.
4. Remove the thumbscrew
securing the SCSI hard drive backplane board to the hard
drive cage.
5. Pull the SCSI hard drive backplane board
up, then away
from the drive cage area of
the chassis.
1
2
4
3
Figure 2-26.
Removing the SCSI hard drive backplane board
Reverse steps 1 through 5 to replace the SCSI hard drive backplane board.