Compaq DL580R01 Service Guide - Page 88

Found in Array, Reports Valid Data

Get Compaq DL580R01 - ProLiant - 512 MB RAM PDF manuals and user guides
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Diagnostics and Troubleshooting 3-19 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1789-Drive Not None Responding, Physical Drive Check cables or replace physical drive X. Select "F1" to continue - drive array will remain disabled. Select "F2" to fail drive(s) that are not responding. Interim Recovery Mode will be enabled if configured for fault tolerance. 1790-Disk 0 None Configuration Error 1791-Disk 1 Error None 1792-Drive Array None Reports Valid Data Found in Array Accelerator. Data will automatically be written to drive array. 1793-Drive Array - None Array Accelerator Battery Depleted - Data Lost (Error message 1794 also displays.) Probable Source of Problem Cable or hard drive failure Recommended Action 1. Check the cable connections. 2. Replace the cables. 3. Replace the drive. If you do not want to replace the drive now, press F2. Hard drive error or wrong drive type Hard drive error or wrong drive type Indicates that while the system was in use, power was interrupted while data was in the array accelerator memory. Power was then restored within 8 to 10 days, and the data in the array accelerator was flushed to the drive array. Indicates that while the system was in use, power was interrupted while data was in the array accelerator memory. Array accelerator batteries failed. Power was not restored within 8 to 10 days. Data in array accelerator has been lost. Run the System Configuration Utility and Diagnostics and correct. Run the System Configuration Utility and Diagnostics and correct. No data has been lost. Perform orderly system shutdowns to avoid data remaining in the array accelerator. Perform orderly system shutdowns to avoid data remaining in the array accelerator. continued

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
Diagnostics and Troubleshooting
3-19
Table 3-2
POST Error Messages
continued
Error Code
Audible Beeps
Probable Source of Problem
Recommended Action
1789-Drive Not
Responding, Physical
Drive
Check cables or
replace physical
drive
X
.
Select
“
F1
”
to
continue
–
drive
array will remain
disabled.
Select
“
F2
”
to fail
drive(s) that are not
responding.
Interim Recovery
Mode will be enabled
if configured for fault
tolerance.
None
Cable or hard drive failure
1.
Check the cable
connections.
2.
Replace the cables.
3.
Replace the drive. If you
do not want to replace the
drive now, press
F2.
1790-Disk 0
Configuration Error
None
Hard drive error or wrong drive
type
Run the System Configuration
Utility and Diagnostics and
correct.
1791-Disk 1 Error
None
Hard drive error or wrong drive
type
Run the System Configuration
Utility and Diagnostics and
correct.
1792-Drive Array
Reports Valid Data
Found in Array
Accelerator.
Data will
automatically be
written to drive array.
None
Indicates that while the system
was in use, power was
interrupted while data was in the
array accelerator memory. Power
was then restored within 8 to 10
days, and the data in the array
accelerator was flushed to the
drive array.
No data has been lost. Perform
orderly system shutdowns to
avoid data remaining in the
array accelerator.
1793-Drive Array
–
Array Accelerator
Battery Depleted
–
Data Lost
(Error message 1794
also displays.)
None
Indicates that while the system
was in use, power was
interrupted while data was in the
array accelerator memory. Array
accelerator batteries failed.
Power was not restored within 8
to 10 days. Data in array
accelerator has been lost.
Perform orderly system
shutdowns to avoid data
remaining in the array
accelerator.
continued