HP 2605dn HP Color LaserJet 2605/2605dn/2605dtn - User Guide - Page 25
Envelope storage, Envelope construction, Weight, Construction, Condition, Temperature
View all HP 2605dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Type of address Return address Delivery address Top margin 15 mm (0.6 inch) 51 mm (2 inches) Left margin 15 mm (0.6 inch) 89 mm (3.5 inches) ● For the best print quality, position margins no closer than 15 mm (0.6 inch) from the edges of the envelope. ● Avoid printing over the area where the envelope seams meet. Envelope storage Proper storage of envelopes helps contribute to print quality. Envelopes should be stored flat. If air is trapped in an envelope and creates an air bubble, then the envelope might wrinkle during printing. Envelope construction Envelope construction is critical. Envelope fold lines can vary considerably, not only between manufacturers, but also within a box from the same manufacturer. Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following components: ● Weight: The weight of the envelope paper should not exceed 90 g/m2 (24 lb) or jamming might occur. ● Construction: Before printing, envelopes should lie flat with less than 6 mm (0.25 inch) curl, and should not contain air. ● Condition: Envelopes should not be wrinkled, nicked, stuck together, or otherwise damaged. Never use envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials. ● Temperature: Use envelopes that are compatible with the heat and pressure of the printer. This printer's fusing temperature is 210°C (410°F). ● Size: Use only envelopes that are within the following size ranges. Tray Tray 1 or Tray 2 Minimum Maximum 76 x 127 mm (3 x 5 inches) 216 x 356 mm (8.5 x 14 inches) Envelopes with double side-seams Double side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Be sure the seam extends all the way to the corner of the envelope as indicated in the following illustration. ENWW Print-media specifications 13