HP 5550dn HP Color LaserJet 5550 series - User Guide - Page 58

Configure device menu The configure device menu allows you to change or reset the default print settings, adjust the print quality, and change the system configuration and I/O options. Printing menu These settings affect only jobs without identified properties. Most jobs identify all of the properties and override the values set from this menu. This menu can also be used to set default paper size and type. Menu item COPIES DEFAULT PAPER SIZE DEFAULT CUSTOM PAPER SIZE DUPLEX DUPLEX BINDING OVERRIDE A4/LETTER MANUAL FEED COURIER FONT WIDE A4 Values Description 1 - 32000 Allows you to set the default number of copies. A list of available sizes appears. Allows you to set the default paper size. UNIT OF MEASURE X DIMENSION Y DIMENSION Allows you to set the default size for any job without dimensions. OFF ON Allows you to enable or disable the duplex function on models with duplexing capability. LONG EDGE SHORT EDGE This item appears only if the printer has a duplex unit and if DUPLEX is set to ON. It allows you to choose the edge of the paper to use for binding duplex jobs. NO YES Allows you to set the printer to print an A4 job on letter-size paper when no A4 paper is loaded, a letter-size job when no A4-size paper is loaded, an A3 job on 11 x 17-size paper when no A3 paper is loaded, and a 11 x 17-size job on A3 paper when no 11 x 17-size paper is loaded. ON OFF Allows you to manually feed paper. REGULAR DARK Allows you to select a version of the Courier font. NO YES Allows you to change the printable area of A4 paper so that eighty 10-pitch characters may be printed on a single line. 44 Chapter 2 Control panel ENWW