HP 5550dn HP Color LaserJet 5550 series - User Guide - Page 69
PowerSave Time, To set the printer default for PS Defer Media, To set PowerSave Time
UPC - 829160126913
View all HP 5550dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Note ENWW 7. Press to select TRAY BEHAVIOR. 8. Press to highlight MANUAL FEED PROMPT. 9. Press to select MANUAL FEED PROMPT. 10. Press or to select ALWAYS or UNLESS LOADED. 11. Press to set the behavior. 12. Press MENU. To set the printer default for PS Defer Media 1. Press MENU to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight TRAY BEHAVIOR. 7. Press to select TRAY BEHAVIOR. 8. Press to select PS DEFER MEDIA. 9. Press or select ENABLED or DISABLED. 10. Press to set the behavior. 11. Press MENU. PowerSave Time The adjustable PowerSave Time feature reduces power consumption when the printer has been inactive for an extended period. You can set the length of time before the printer goes into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 60 MINUTES, 90 MINUTES, 2 HOURS, or 4 HOURS. The default setting is 30 MINUTES. The printer display dims when the printer is in PowerSave mode. PowerSave mode does not affect printer warm-up time unless the printer was in PowerSave mode for more than 8 hours. To set PowerSave Time 1. Press MENU to enter the MENUS. 2. Press to highlight CONFIGURE DEVICE. 3. Press to select CONFIGURE DEVICE. 4. Press to highlight SYSTEM SETUP. 5. Press to select SYSTEM SETUP. 6. Press to highlight POWERSAVE TIME. 7. Press to select POWERSAVE TIME. 8. Press or to select the appropriate time period. 9. Press to set the time period. 10. Press MENU. Changing printer control panel configuration settings 55