HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 22
user can use more commands now.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ping quit rsh ssh2 super telnet tftp tracert Ping function Exit from current command view Establish one RSH connection Establish a secure shell client connection Set the current user priority level Establish one TELNET connection Open TFTP connection Trace route function # Configure the device to perform no authentication for Telnet users, and to authorize authenticated Telnet users to use level-0 and level-1 commands. (Use no authentication mode only in a secure network environment.) system-view [Sysname] user-interface vty 0 7 [Sysname-ui-vty0-15] authentication-mode none [Sysname-ui-vty0-15] user privilege level 1 # Display the commands a Telnet user can use after login. Because the user privilege level is 1, a Telnet user can use more commands now. ? User view commands: debugging Enable system debugging functions dialer Dialer disconnect display Display current system information ping Ping function quit Exit from current command view refresh Do soft reset reset Reset operation rsh Establish one RSH connection screen-length Specify the lines displayed on one screen send Send information to other user terminal interface ssh2 Establish a secure shell client connection super Set the current user priority level telnet Establish one TELNET connection terminal Set the terminal line characteristics tftp Open TFTP connection tracert Trace route function undo Cancel current setting # Configure the device to perform password authentication for Telnet users, and to authorize authenticated Telnet users to use the commands of privilege levels 0, 1, and 2. system-view [Sysname] user-interface vty 0 7 [Sysname-ui-vty0-15] authentication-mode password [Sysname-ui-vty0-15] set authentication password simple 123 [Sysname-ui-vty0-15] user privilege level 2 After the configuration is complete, when users Telnet to the device, they must enter the password 12345678. After passing authentication, they can use commands of levels 0, 1, and 2. 16