HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 55
Whether local, RADIUS, or HWTACACS, Enter AUX user
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Step 1. Enter system view. 2. Enter AUX user interface view. Command system-view user-interface aux first-number [ last-number ] 3. Enable scheme authentication. authentication-mode scheme 4. Enable command authorization. command authorization 5. Enable command accounting. command accounting 6. Exit to system view. quit Remarks N/A N/A Whether local, RADIUS, or HWTACACS authentication is adopted depends on the configured AAA scheme. By default, no authentication is performed for modem dial-in users. Optional. By default, command authorization is disabled. The commands available for a user only depend on the user privilege level. If command authorization is enabled, a command is available only if the user has the commensurate user privilege level and is authorized to use the command by the AAA scheme. Optional. By default, command accounting is disabled. The accounting server does not record the commands executed by users. Command accounting allows the HWTACACS server to record all executed commands that are supported by the device, regardless of the command execution result. This function helps control and monitor user behaviors on the device. If command accounting is enabled and command authorization is not enabled, every executed command is recorded on the HWTACACS server. If both command accounting and command authorization are enabled, only the authorized and executed commands are recorded on the HWTACACS server. N/A 49