HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 53
Configuring none authentication for modem dial-in, Configuring password authentication for modem
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
command. The connection is terminated if "OK" is displayed. You can also terminal the connection by clicking in the HyperTerminal window. IMPORTANT: Do not directly close the HyperTerminal. Doing so can cause some modems to stay in use, and your subsequent dial-in attempts will always fail. Configuring none authentication for modem dial-in Step 1. Enter system view. 2. Enter one or more AUX user interface views. 3. Enable the none authentication mode. 4. Configure common settings for the AUX user interfaces. Command Remarks system-view N/A user-interface aux first-number [ last-number ] N/A authentication-mode none By default, modem users can dial in to the device without authentication. See "Configuring common settings for modem dial-in (optional)." Optional. The next time you attempt to dial in to the device, you do not need to provide any username or password, as shown in Figure 24. Figure 24 Dialing in to the device without any authentication Configuring password authentication for modem dial-in 47