HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration - Page 33
Configuring password authentication for console login,
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
The next time you attempt to log in through the console port, you do not need to provide any username or password, as shown in Figure 9. Figure 9 Accessing the CLI through the console port without authentication Configuring password authentication for console login Step 1. Enter system view. Command system-view Remarks N/A 2. Enter AUX user interface view. user-interface aux first-number [ last-number ] N/A 3. Enable password authentication. authentication-mode password By default, you can log in to the device through the console port without authentication and have user privilege level 3 after login. 4. Set a password. 5. Configure common settings for console login. set authentication password { cipher | simple } password By default, no password is set. See "Configuring common console login settings (optional)." Optional. The next time you attempt to log in through the console port, you must provide the configured login password, as shown in Figure 10. 27